Connecting The Myintercom Video Door Intercom; Lan Connection; Power Supply; Switch Output - Telecom Behnke myintercom Manual De Instrucciones

GB
Instructions for myintercom
Operation
1.9. Connecting the myintercom video door intercom

LAN connection

The LAN connection is generally in the form of
an RJ-45 plug (
nect the individual leads directly to a terminal
strip ( ); in accordance with EIA/TIA 568 B,
the network is connected to the terminals as
follows: 3 (green-white), 6 (green), 1 (orange-
white) and 2 (orange) whereby the number
denotes the respective pin of the RJ-45 plug
or socket.

Power supply

Power is supplied to the myintercom video
door intercom via the Behnke 15V wall-plug
power supply. The use of any other power
supply is not permitted.

Switch output

Potential-free output for controlling a door
opener, maximum load 24V, 2A.
12V ~ 1A output
Power supply for door opener
32
). It is also possible to con-
Switch output
Potential-free output for controlling an exter-
nal door bell, maximum load 20V, 2A
If power supply for door opener is not available
on site:
* TÖ = Door opener
If power supply for door opener is available
on site:
*
TÖ = Door opener

Connecting an external door bell:

Ext. door open button
(on site)
TÖ
Ext. door open button
(on site)
TÖ
Ext. door opener power
supply, Max. 24V, 2A
door bell
(on site)
bell transformer (on site)