Leister MISTRAL Instrucciones De Funcionamiento página 15

Operation
• Before putting into operation, check power cable (1) and connector for electrical and mechanical damage.
• The device must be installed by an expert.
• Reduce air volume using the air flow control (4) if need be.
• Switch on mains switch (2) and heat up approx. 5 min.
• Set hot air temperature or heat output via external control 4 – 20 mA or 0 – 10 V (see pictures of regulated or con-
trolled application).
Allow device to cool down after operation.
Regulated application of MISTRAL System
CSS
CSS: • Economical
• Control unit for external integration
Controlled application of MISTRAL System
CSS
CSS: • Economical
• Control unit for external integration
External
potentiometer
4 – 20 [mA]
0 – 10 [V]
• Simple connection to SPM 01
• Configured ready for use
4 – 20 [mA]
0 – 10 [V]
0 – 100 %
• Simple connection to SPM 01
• Configured ready for use
4 – 20 [mA]
0 – 10 [V]
0 – 100 %
MISTRAL System
MISTRAL System
MISTRAL System
Thermal
probe
15