After Setup; The Internet Appears To Be Unavailable - Linksys R63 Guia Del Usuario

To fix the problem on Mac computers, do the following:
1. In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks will
appear. Linksys Smart Wi-Fi has automatically assigned your network a name.
2. Click your own network name. Click Connect. In the example below, the computer was
connected to another wireless network named wraith_5GHz. The wireless network name of the
Linksys EA6350 router, Damaged_Beez2.4 in this example, is shown selected.
3. Click the wireless network name of your Linksys EA6350 router (BronzeEagle in the example).
4. Type your wireless network password (Security Key) into the Password field. Click OK.

After setup

The internet appears to be unavailable

If the internet has difficulty communicating with your router, the problem may appear as a "Cannot
find [internet address]" message in your Web browser. If you know that the internet address is
correct, and if you've tried several valid internet addresses with the same result, the message could
mean that there's a problem with your ISP or modem communicating with your router.
Try the following:
• Make sure that the network and power cables are securely connected.
• Make sure that the power outlet that your router is connected to has power.
Reboot your router.
•
• Contact your ISP and ask about outages in your area.
The most common method of troubleshooting your router is to turn it off, then back on again. Your
router can then reload its custom settings, and other devices (such as the modem) will be able to
rediscover the router and communicate with it. This process is called rebooting.
To reboot your router using the power cord, do the following:
1. Disconnect the power cord from the router and the modem.
2. Wait 10 seconds and reconnect the power cord to the modem. Make sure it has power.
3. Wait until the modem's online indicator has stopped blinking (about two minutes). Reconnect
the power cord to the router.
16