User Instructions; How To Use - Easy Home TP-AVC802 Manual Del Usuario

User instructions

Read all instructions before first use and follow them carefully.
DO NOT immerse the robotic floor duster in water or any other liquid.

How to Use

1. The robotic floor duster needs to charge for 10 hours before first use.
2. Connect the supplied adapter to the charging port and plug the charger into a
suitable electrical outlet.
3. The power indicator light will turn RED when the charge is connected, and the
battery is charging.
4. After charging is complete, the light will go OFF. Unplug the charger from the
outlet. It takes 10 hours to fully recharge every time the battery is fully
discharged.
5. To retain the life of the battery, the floor duster must be charged every 2 months.
6. It is recommended to charge the floor duster after every use.
7. Attach disposable cleaning pad underneath the soft base, on top of the velcro.
8. The floor duster has two options of time that it can run.
a. 30 minutes (indicator light will stay on)
b. 120 minutes (if battery is fully charged, indicator light may blink slowly)
9. For the best area coverage, start with the floor duster in the middle of the room.
10. To start the floor duster, choose 30 minutes for smaller rooms and 120 minutes
for larger rooms.
11. To stop the floor duster, press either of the two minute buttons.
12. If necessary, change or dispose of the disposable cleaning pad.
13. For the most efficient cleaning, keep your floors as clear as possible by
temporarily removing wires, rugs, chairs and small objects. With less obstacles,
the floor duster will move faster and clean more effectively.
WARNING: The robotic floor duster does not have sensors, so it can fall downstairs,
balconies or steps. Always use on a flat surface.
10
User instructions