Cleaning And Maintenance - Easy Home FJ142L-120-500 Manual Del Usuario

Cleaning and maintenance

CAUTION:
Always be sure that the Vacuum is turned OFF and UNPLUGGED before cleaning
or attempting to store the item. NEVER IMMERSE THE MOTOR in water or any
other liquid. NEVER operate the Vacuum without the dust container and filter in
place.
How to clean the filters
1. To maintain optimal performance, the filters should be cleaned every two
months under normal use.
2. HEPA Filter – The HEPA filter is located under the top dust container lid. Use
the top tab to remove the HEPA filter from the dust container. Hold filter over
a trash receptacle and tap out dirt and debris.
3. Exhaust Filter – The exhaust filter is located at the bottom of the vacuum.
Press the catch and pull the exhaust filter grill away from the vacuum. Pull the
bottom of the filter outward so the top of the filter unhooks from the filter
recess. The exhaust filter can be lightly rinsed with warm tap water. Please
make sure that the exhaust filter is completely dry before the next use.
How to clean the dust chamber
1. Pull the entire dust chamber out of the dust container.
2. Dirt and debris on the dust chamber screen can be cleaned with a soft brush
or a slightly damp cloth.
3. How to Clean the Dust Container
4. Remove the dust chamber and HEPA filter from the dust container.
5. The dust container can be rinsed with warm soapy water and dried with a soft
cloth. NOTE: Please make sure that the dust chamber has dried completely
before next use.
How to clean the vacuum head
1. Turn the vacuum head over so the bottom is facing up. Locate the two tabs on
either side of the air wheel cover. Squeeze the tabs and remove the air wheel
cover.
2. Remove any debris that has gathered around the vacuum head brush. String,
hair, or fabric will obstruct brush movement.
Cleaning and maintenance
9