User Instructions - Easy Home SD-002 Manual Del Usuario

User Instructions

How to use
1. Place dryer on a solid, flat surface such as board or floor.
2. Push and hold the open/close button to open the brackets then release the
button.
3. If necessary, raise the dryer brackets to accommodate a longer boot, shoe or
glove by pressing the dryer bracket button on one or both brackets and pull
up to extend and lock into place.
4. Plug the dryer into a power outlet.
5. According to footwear or glove type and dampness, set dryer time. Turn timer
knob clockwise to desired time. Unit will begin drying.
6. When finished drying, or if footwear or gloves are dry before the timer is up,
turn knob to "OFF" position, remove plug from outlet, and remove boots,
shoes, or gloves from dryer.
7. Never leave the dryer on and unattended.
WARNING: The dryer will get hot within a few seconds and should not be placed
in contact with the skin or any other part of the body.
Time settings
Running/walking/sport shoes
Snow or work boots
Leather shoes
Gloves
8
Approximately 20 minutes
Approximately 20 minutes
Approximately 15 minutes
Time will vary depending on type
User instructions