Pairing With Your Device - SONIXX SX1 Instrucciones De Manejo

PAIRING WITH YOUR DEVICE

Pairing procedures are subject to different makes and model of mobile phone. Please
refer to your mobile phone user's manual for further information.
The general pairing procedures are as follows:
1.
2.
3.
4.
5.
6.
You should now be able to listen to music as well as make and receive a call using
the headset.
Notes:
•
•
•
sx1ii-manual.indd 7
Place the headset and Bluetooth phone/device where they are easily viewable
by no more than 1 meter apart
Enter the headset's pairing mode (please refer to "How to enter pairing mode")
Enable Bluetooth on your device, search for Bluetooth devices within range, and
select "SX1" from the list of devices shown
If prompted to enter a password or PIN. enter "0000"
test
If prompted to connect, select "Yes" (this will vary among mobile phone models)
After successfully connecting, the blue LED will flash 3 times
If pairing fails, please turn off the headset first and then re-pair according to
steps 1-6 mentioned above.
After pairing is successful, the headset and the mobile phone will remember
each other, they will not need to re-pair next time. The headset can remember 8
paired devices. When the number of paired devices exceeds 8, the first one will
be replaced
Every time the headset is turned on, it will connect to last connected device
automatically. If you want to pair it with other devices, please turn off the
Bluetooth function of last connected devices first and pair the headset with the
new device according to steps 1-6 mentioned above.
7
15/03/2014 07:12