Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
Read these instructions completely before using the Battery Charger and save them for future reference. Failure
to follow instructions may damage battery and cause serious injury or death.
WARNING
Use this Charger/Starter only on flooded lead-acid batteries. Other batteries may be damaged or may
overheat, leak, or catch fire.
DO NOT PLUG IN CHARGER/STARTER UNTIL DIRECTED TO DO SO.
Mode/Function Start/Stop
Reconditioning Mode
Cables Reversed
Display Select
OPERATION
1. Function Select Button: Press to cycle through
below functions:
a. 6V/12V 2A - Slow Charge.
b. 12V 10A - Fast Charge.
c. 6V/12V 40A Boost - Quick charge.
NOTICE: Read the vehicle operator's manual before
using engine start.
d. 12V 200A Engine Start.
2. Start/Stop - Start or stop function.
3. LED Indicators:
a. RECONDITIONING: Comes on when Battery is
deeply discharged.
b. CABLES REVERSED: Comes on when battery
Cables are reversed.
c. MAINTENANCE: Comes on when battery is
fully charged.
d. VOLTAGE: Comes on when voltage is being
displayed.
e. CURRENT: Comes on when amperage is being
displayed.
On/Off
LCD Display
Status
Volts
Amps
Maintenance Mode
WWW.FORNEYIND.COM
f. STATUS: Comes on when status is being
displayed. Example: CHARG will display while
battery is charging.
4. Display Select: Cycles through Voltage, Current
and Status displays.
5. Digital Display:
a. XX.XX V: Voltage.
b. XX.XX A: Amperage.
c. WRONG: Cable disconnected, short circuit, low
or high voltage.
d. REVER: Cables reversed.
e. CHARG: Charging.
f. FULL: Charged.
g. XX S: Cooling countdown.
h. DESUL: Desulfating.
i. RECON: Reconditioning.
j. BAD: Bad battery
8
Publicidad
Tabla de contenido
