VERTBAUDET TB1102C Instrucciones De Uso página 15

for professional or semi-professional use, or without observing the instructions for use, the
warranty may be void and allegre puericulture cannot be held liable for any damage caused.
--Take care that the blades are not covered with food before activating the steam function.
--Do not lift or move the appliance when in use.
--Before opening the lid and adding other ingredients to be blended if necessary, check that the
lid has cooled sufficiently after cooking.
--Blend food in 10-second cycles, and never exceed 30 seconds of continuous
FEAUTRES
1. It can blends and steams for food of infant feeding, also can be used as a chopper;
2. Manual switch with light indication
3. With 1000ml large capacity blending jar and 500ml water tank with LED
indication;
4. Cool touch design on the blending jar;
5. Tritan material for mixing cup;
6. W/a detachable drawer for small tableware storage;
7. 700W for heating, 200W for blending.
Important information for installing and removing the blade and Blender jar
Installing and Removing the Blade
1. Position the seal ring (I) with the suction pad (Flared part) facing downwards
2. Place the ring (I) over the blade bottom.
3. Place the flower-shaped part (J) beneath the bowl with the smaller part
directly, holding the blade on the other side.
4. Give it a quarter turn anticlockwise
Important：Pull on the "flower" part to check that the blade is properly screwed in.
Placing the blender jar
1. Place the blending jar lid (M) over the blender jar (G) and turn the lid anticlockwise until you
hear a "click".Turn the lid clockwise if you want to remove it.
2. The hole on the side of the blender jar must Line-up exactly with the steam outlet on the food processor.
When the lid is fitted on to the blender jar, the hook of the lid must be fully inserted in the base hole.
Turn the blender jar clockwise if you want to remoe it.
for steam cooking function
blending.