Button Function - Helo T1 Instalación Y Manual De Uso

User and installation manual Helo-T1
2.3 Remote control ON/OFF push button (accessory)

Button function

The sauna heater can be started by using a remote control On/Off button. The LED light on the push button lights
up to show that the sauna heater has been activated. The sauna heater runs according to the maximum time and
temperature set in the control panel T1. The sauna heater can also be turned off by pressing the push button.
The push button is sealed with
paste so that it can be installed
in a sauna room. Max. installa-
tion height 1 m, min. distance
from the sauna heater 0.5 m.
The push button can be
installed through a wall or by
making a suitable hole where
the button can be embedded.
A surface mounting box can
also be used; it does not need
to be sealed as the push button
itself is moisture proof.
Connection of the push button
Led indicator light
ON/OFF button
11 12 13 14 15 16 17 18
Control panel T1 Multiway terminal block
Retaining nut
46 mm
24 mm
19 20 21
Push button
8
40 mm
32 mm