Product Description And Specifications - Bosch GBM 16-2 RE Manual Original

OBJ_BUCH-21-005.book Page 12 Monday, October 24, 2011 10:57 AM
12 | English
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for drilling in wood, metal, ceramic
and plastic.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Key type drill chuck
2 Gear selector
3 Lock-on button for On/Off switch
4 On/Off switch
5 Chuck key
6 Rotational direction switch
7 Depth stop
8 Wing bolt for depth stop adjustment
9 Auxiliary handle (insulated gripping surface)
10 Handle (insulated gripping surface)
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Technical Data
Rotary drill
Article number
Rated power input
Output power
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
1 609 929 T41 | (24.10.11)
Rotary drill
No-load speed
– 1st gear
– 2nd gear
Rotational speed under load, max.
– 1st gear
– 2nd gear
Rated torque (1st/2nd gear)
Spindle collar dia.
Maximum drilling diameter
(1st/2nd gear)
– Steel
– Wood
– Aluminium
Chuck clamping range
Tapered drill spindle
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 83 dB(A); Sound power level 94 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
Drilling into metal: a
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
GBM 16-2 RE
when it is running but not actually doing the job. This may sig-
Professional
nificantly reduce the exposure level over the total working pe-
0 601 120 5..
riod.
W 1050
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
W 570
accessories, keep hands warm, organise work patterns.
GBM 16-2 RE
Professional
-1
min 0 – 600
-1
min 0 – 1450
-1
min 0 – 400
-1
min 0 – 950
Nm
mm
mm
mm 40/20
mm 20/13
mm 1.5 – 16
kg
(triax vector sum) and uncertainty K
h
2 2
=2.5 m/s , K=1 m/s .
h
Bosch Power Tools
14/6
43
16/8
B 16
3.7
/II