the motor manufacturer.
FR
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qua
ES
Foran inspection or maintenance of the electrical parts, the external blind shall be
disconnected from the energy supply in a reliable way.
PT
IT
4. USE
EL
Max. load for non-retractable parts: 800Pa
PL
The controller shal
UA
Do not modify the appliance in any way!
Never open the electronic command box (this will void the warranty).
RO
Never use accessories which are not recommended by the manufacturer. They could pose
a safety risk to the user and might damage the appliance. Only use original parts and
EN
accessories.
Do not hang anything on the frame or on the folding arms as the awning may fall down and
cause damage or personal injury.
Do not use this appliance in adverse weather conditions. If wind speeds are stronger than 4 on
the Beaufort wind force scale, retract the awning.
Never use the appliance on rainy days.
Do not use it in places of high temperature such as walls near furnaces.
The operation in frosty conditions may damage the awning.
Save enough free space around the awning while rolling or unrolling.
Do not barbecue under the awning or ignit
Check the awning every 3 months to ensure al
products.
Frequently examine the installation for imbalance and signs of wear or damage to cables and
springs. Do not use if repair or adjustment is necessary.
Never use a damaged appliance! Disconnect the appliance from the power supply and contact
your supplier if it is damaged.
Unless advised to the contrary by a technician, do not attempt to use the awning if repair or
adjustment is needed.
Take care when operating the manual release with the external blind retracted since it may
fall rapidly due to weak or broken springs.
Watch the moving shutter and keep people away until the shutter is completely closed.
rsons in order to avoid a hazard.
xed lower than 1.3m.
88
re near to the awning.
ng are tightened and no damage on the