Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5
SPECIFICATIONS
Technology
Biometry and Proximity (125 Khz, EM)
Use
Outdoors
Finger and Keypad
Authentication
Fingerprints per user
1-10 fingerprints
PIN code lenght
1 to 8 digits
Interface
Protocol programming
By software
Cable distance
50m
Fingerprint Sensor Type
1:1000 identification time
Fingerprint enrolment
On the reader or from the USB desktop reader
Cable, 1m
Panel Connection
Externally Controlled
Green and Red LED
Orange LED
Idle mode
Buzzer ON/OFF
MOUNTING
1.
5mm
RECOMMENDED SWIPING TECHNIQUE
Follow the below instructions for correct finger swiping. Starting from the first finger joint, place the selected
finger on the swipe sensor and move it evenly towards oneself in one steady movement.
Result:
For a valid swipe: Tricolour Status LED turns green + OK Beep(short + long beep)
For an invalid or misread swipe: Tricolour Status LED turns red + Error Beep ( 3 short beeps)
x 6
The fingerprints are enrolled in the system by swiping the finger a minimum of 6 times.
INDICATION
Wiegand 8 to 128 bits; Default: Wiegand 26bit
Swipe Capacitive
970 msec, including feature extraction time
Yes
2.
4 (4 x 30mm)
Green
- Access granted
Red
- Acceso denied
Orange
- Idle mode
Backlight ON/OFF
Yes, by software settings
Tamper
Yes
Consumption
Max. 150mA
IP Rating
IP65
Power supply
9-14V DC
Operating Temperature
-20°C to +50°C, non-condensing
Dimensions (mm)
100 x 94 x 30
Housing
Moulded Aluminium
Storage/Operating Humidity
5% to 93% RH without condensation
94 mm
3.
OK beep
- short + long beep
ERROR beep
- 3 short beeps
Swipe finger - 2 short beeps
NETWORK BIOMETRIC + KEYPAD READER
100 mm
4.
Publicidad
Tabla de contenido
