Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4. Place the blender jug (C) onto the motor unit (G). Lock the blender jug (C) correctly
(Fig. 1).
Ingredients
Fruits (kiwis, bananas, strawberries,
pineapple...)
Vegetables (tomatoes, avocado...)
Vegetable soups
Milk-shakes
5. Plug in the appliance and switch it on by pressing the low-speed or high-speed but-
ton (E or F). The blender will not operate if the blender jug is not correctly fitted.
6. Hold the appliance firmly with both hands during operation. Do not operate the
appliance for more than one minute at a time. After blending for one minute,
switch off the appliance and wait for 15 minutes before blending again. If the
appliance becomes hot, let it cool down before you continue using it.
Recommendations:
- Do not operate the appliance more than one minute continuously.
- Allow the appliance to cool down for 1 hour after 5 consecutive uses.
• To add ingredients while the blender is in use, insert them through the feeder hole
in the lid (B).
• Cut the ingredients into small pieces (approx. 0.6 inches * 0.6 inches / 15mm x
15mm) before putting them in the blender jug (C). Do not process a large quantity
of ingredients at the same time.
CAUTION: If ingredients remain stuck to the blades, unplug the appliance and
remove them with a spatula.
Using the chopper and grinder
accessories (H or I) (depending on model)
(Grinder (H) is not applicable to BL 125D42 & BL125D76)
The chopper accessory (I) allows you to chop ingredients such as meat (up to
3oz / 80g cut into pieces), onions, garlic, ginger...
The grinder accessory (H) allows you:
- to grind coffee beans (up to 3oz / 80g)
- to grind or chop various spices (chilies), rice, dried fruits and nuts such as
hazelnuts, almonds.
6
Quantities (Max)
7oz / 200g
7oz / 200g
7oz / 200g cooked vegetables + water
(optional)
4oz fruit + 10oz milk /
100g fruit + 300ml milk
Publicidad
Tabla de contenido
