Care And Maintenance - Pleasant Hearth LS938-144LC Manual De Instrucciones

ASSEMBLY INSTRUCTIONS
1. Attach two horizontal base bars (B) to a vertical end (A)
by inserting 4 carriage bolts (AA) through the predrilled
holes in the vertical end (A), the predrilled holes in the
spreader bar (C), and the predrilled holes in the horizontal
base bars (B). Insert two washers (CC) between the vertical
end (A) and the spreader bar (C) on the bottom hole only.
Then, insert two washers (CC) between the spreader bar
(C) and the horizontal base bars (B) on the bottom hole
only.Then secure all bolts with nuts (BB). Tighten with the
wrench (DD).
Repeat with the second vertical end (A), two additional
horizontal base bars (B), and the second spreader bar (C).
Hardware Used
M8x90mm Carriage
AA
Bolt
BB
Nut
Washer
CC
DD Wrench
2. Attach the remaining horizontal base bars (B) to the-
completed end assemblies by inserting 8 carriage bolts
(AA) through the predrilled holes in the
horizontal base bars (B) and remaining two spreader bars
(C). Insert two washers (CC) between the completed as-
semblies on the bottom holes only, then secure all bolts with
nuts (BB). Tighten with the wrench (DD).
Hardware Used
M8x90mm Carriage
AA
Bolt
BB Nut
Washer
CC
DD Wrench

CARE AND MAINTENANCE

• Keep the log rack protected from elements.
• Do not attempt to overload the rack.
1
x 4
x 4
x 4
2
x 8
C
x 8
x 8
3
C
B
CC
BB
C
B
AA
CC
BB
A
AA