Pleasant Hearth OFW307R Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
2. Insert eight M6 x 10mm bolts (AA) though the
holes in the firebowl (D) and into the rivet nut
in the legs (H). Use a Phillips screwdriver to
loosely tighten the M6x10mm bolts (AA), but
do not fully tighten at this time.
Hardware Used
AA
M6x10mm Bolt
3. Attach the leg support ring (I) to the legs
(H) by inserting four M6 x 10mm bolts (AA)
through the holes in the support ring and into
the rivet nuts in the legs. Tighten all bolts
including those from the previous step with a
Phillips screwdriver.
Hardware Used
AA
M6x10mm Bolt
4. Finger tighten four threaded pegs (CC) to
the inside of the fire bowl (D) as illustrated
in figure 4.
Hardware Used
CC
Threaded Pegs
2
D
x 8
H
3
H
x 4
4
x 4
5
AA
AA
I
CC
D