Publicidad
Idiomas disponibles
Idiomas disponibles
OVERVIEW
Thank you for choosing the P.T.Rail Angled from HealthCraft. Please read
and understand the instructions in this manual; keep manual for future
reference. It is your responsibility to see that your P.T.Rail Angled is
properly assembled, installed, and cared for. Failure to follow instructions in
this manual could result in serious injury or death. If you are not equipped
to undertake the outlined work, we would recommend that you have your
P.T.Rail Angled installed by a qualified contractor.
The P.T.Rail Angled is a high quality, commercial grade, fold down rail for
use on short staircases. The P.T.Rail Angled is intended for moderate
vertical and horizontal load bearing to provide assistance and support for
people with reduced mobility. The P.T.Rail Angled is intended to bear
weight ONLY when the handle is in the down position; the handle is not
intended to bear weight in any other position. The P.T.Rail Angled handle is
intended to be folded up when not in use. A friction hinge ensures that the
handle will not inadvertently lower when it is in the up position. The P.T.Rail
Angled is installed with appropriate fasteners to a structural wall.
LIMITED LIFETIME WARRANTY
Products are covered by a limited lifetime warranty against defects in
materials and workmanship for the original purchaser. Warranty excludes
products that have been damaged through misuse, accidental damage,
alteration, normal wear and tear, wood material and stain, or the use of
corrosive or abrasive cleaning products.
Buyer hereby indemnifies, agrees to hold harmless and defend HealthCraft
Products Inc. from and against any and all liabilities, claims, (founded and
unfounded), losses, damages, costs and expenses (including without
limitation consequential damages and reasonable professional fees)
resulting from buyers specification, application, or improper use of goods
described hereon; buyers omission or neglect. HealthCraft Products Inc.
does not assume any liability for damage resulting from services performed
by others or faulty installation, misuse or misapplication of goods sold by
HealthCraft Products Inc. HealthCraft Products Inc. shall not be liable for
prospective profits or special, indirect, or consequential damages, or for the
cost of any corrective work done without HealthCraft Products Inc. prior
approval. HealthCraft Products Inc. total liability hereunder shall in no
event exceed the purchase price of the goods specified hereon.
Specifications subject to change without notice.
HealthCraft Products Inc.
2790 Fenton Road
Ottawa, Canada
K1T 3T7
6
English
Gate 88
Kanalgatan 45B
Skellefteå, Sweden
EC
REP
93123
DELIVERY CONTENTS - P.T.RAIL ANGLED
1. P.T.Rail Angled
2. Extension Screw
3. Jam Nut
4. Washer, 1/4", Lock (x4)
5. Washer, 1/4", Flat (x4)
6. 1/4" x 3" length Lag Bolt (x4)
P.T.RAIL ANGLED INSTALLATION WARNINGS
1. P.T.Rail must be installed to walls that are structurally sound. Add wood
blocking if required.
2. If installation into concrete wall is required, we recommend sleeve or
wedge type anchors suitable for wall construction.
3. CAUTION - Do not install if structure behind wall is unknown.
4. CAUTION - Do not install into metal studs.
5. CAUTION - Only use rail for assistance in down position. Use caution
when moving rail.
6. CAUTION - Pinch point between rail and wall plate.
7. CAUTION - Be careful when on stairs.
Supplied fasteners for wood structure only. If using other fasteners, ensure
screw retention force rating at least 600lbs/272kgs.
INSTALLATION
1. Hold P.T.Rail in desired location and ensure unobstructed rail travel in
all positions, and the space above rail is adequate to fold.
2. Using wall plate a template, mark off hole locations.
3. Drill pilot holes appropriate for fasteners.
4. Secure P.T.Rail to wall using appropriate fasteners.
5. To change angle of rail, insert shaft of screwdriver thru drive hole of
extension screw and turn.
6. Turn jam nut until it is tight with end of rail.
7. Turn both jam nut and extension screw together to jam tight.
8. Remove screwdriver.
PRODUCT USAGE
See Figure D.
TECHNICAL DATA
See Figure E.
FIGURE A.
FIGURE B.
FIGURE C.
Publicidad
