English
Deutsch
Español
TV issues
No video on the TV screen,
though the TV audio
functions
No sound from TV
TV screen goes dark or the
image flips repeatedly after a
change is made to a Video fea-
ture in System settings
TV turns on and off unexpect-
edly
Parental Control forgotten
or does not work
Français
Italiano
Nederlands
What to do
• Check the TV video input selection. Make sure it is correct for the video source.
• Check the connections.
• Make sure component is turned on.
• Refer to the component owner's manual.
• In the System menu, make sure the Video format is set to NTSC (U.S. standard) or PAL
(European standard).
• In the Settings list, make sure the SD Progressive Scan setting is off, unless you have used a
component video connection and progressive scan is a feature of the TV.
• Reposition the TV on/off sensor on the back of your TV. Or check the SCART connector if you use one.
• Verify that the TV on/off sensor is working properly by choosing
System menu.
• In the DVD feature of the System menu, use the number buttons on the remote to enter 2673 in the
Password blanks. This provides temporary access and allows you to change the password.
Svenska
TV Power Status
R
EFERENCE
under Video in the
77