Niko 05-207 Manual Del Usuario página 28

05-207
2. INSTALLATION
Connecting the feedback module
Preferably use the following cables:
- feedback module: 230V~ 50Hz, system cable HO7 V-U 3 x1,5mm
2
- bus push-buttons with LEDs: Nikobus home automation cable 2x2x0,8mm
- touch screen: Nikobus home automation cable 2x2x0,8mm
Connect the cables as shown in the connection diagram below.
05-096
bus push-buttons with LEDs
05-207
28 EN