Problem Solution; Environmental Protection - Worx Professional WU152PT Manual Del Usario

Problem solution

1 WHY DOES THE DRILL NOT TURN ON WHEN YOU PRESS THE
SWITCH?
The forward and reverse switch, which is on top of the trigger, is
positioned in the lock function. Unlock the forward and reverse
switch putting it into the required rotation position. Push the trigger
and the drill will start to rotate (See Fig. B).
2
THE DRILL STOPS BEFORE THE SCREW IS COMPLETELY
TIGHTENED. WHY?
Verify the torque position of the torque adjusting ring, you can find
the torque-adjusting ring between the chuck and the drill body.
Position 1 is the lowest torque (screw driving force) and position
21 is the highest torque (screw driving force). Position 22 is for drill
operation. Regulate the torque adjusting ring to a higher position to
reach the best result.
3
REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES
Charging time problems, having not used a battery pack for a
prolonged time will reduce the battery pack working time. This
can be corrected after several charge and discharge operations by
charging & working with your drill. Heavy working conditions such
as large screws into hard wood will use up the battery pack energy
faster than lighter working conditions. Do not re-charge your battery
pack below 0 C and above 30
o
C as this will affect performance.
o
Maintenance
Remove the battery pack from the tool before carrying out any
adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use
water or chemical cleaners to clean your power tool. Wipe clean with
a dry cloth. Always store your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation slots. This is
normal and will not damage your power tool.

Environmental protection

Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authorities or retailer for recycling advice.
Disposal of an exhausted battery
pack
To preserve natural resources, please recycle or dispose
of the battery pack properly. This battery pack contains
nickel-cadmium or nickel-metal hydride batteries. Consult
your local waste authority for information regarding available recycling
and/or disposal options. Discharge your battery pack by operating your
saw, then remove the battery pack from the saw housing and cover
the battery pack connections with heavy duty adhesive tape to prevent
short circuit and energy discharge. Do not attempt to open or remove
any of the components.
11