Publicidad
English
VERIFY THE CONTENTS INSIDE THE PACKAGE BOX
The package should contain the items plus ICA-4210P. If any item is missing or damaged, please
contact the seller immediately.
Quick Installation Guide
Step 1 : Connecting Network and AC Adapter Power
User PC
(192.168.0.X)
Note : ICA-4210P also supports IEEE 802.3af. Be reminded to power either from AC adapter or PoE
switch.
Step 2 : Utility installs and runs to locate the IP camera (optional)
Please insert the CD-ROM supplied in the product package, and the CD will automatically run the
installation; if not, please click the Utility hyperlink to install.
The IP Wizard II Utility description.
After the camera utility is launched, all cameras
found
in
your
displayed.
The existing IP cameras in the local network
Search the IP camera in the network
To view the IP camera's pictures that you
selected
To modify the IP parameters of the selected IP
camera
Shows the selected IP camera images
Step 3 : Displaying the web page for further configuration
Select the IP camera you want to configure and click the browser icon.
You will connect to IP camera via web browser automatically; The IP
camera will prompt for logon username / password. Please enter admin /
admin as the default user name and password.
Further Configuration
For detailed configuration, please check user's manual on the bundled CD.
If you have any other question, please contact the dealer where you purchased this product or you can
contact PLANET directly at the following email address: support_ica@planet.com.tw
CD-ROM
Ethernet Switch
local
area
network
Power Adapter
will
be
Screw Package
ICA-4210P
Publicidad
