C5 Detergent/Rinse-Aid Dispensers And Settings; C5.1 Manual Activation; C6 Setting The Dispenser - Insinger CADET CDT-1 Instalacion, Uso Y Mantenimiento

C5 DETERGENT/RINSE-AID DISPENSERS AND
SETTINGS
If the appliance is connected to a water softener or
osmotic device, contact the detergent supplier for the
specific product.
Peristaltic dispensers (rinse-aid and detergent) require
periodic maintenance. The internal hose of the rinse-aid
dispenser should undergo periodic maintenance (at
least once or twice a year).
1. Dishwasher with incorporated detergent dispen-
ser pump [R] (Figure 11).
When the appliance is filled with water for the first time in
the day, pump "R" dispenses a detergent quantity in the
tank. At each cycle, pump "R" dispenses a detergent
quantity in the tank to keep proper detergent concentra-
tion. Insert the hose provided in the kit into the detergent
container.
2. Dishwashers with incorporated peristaltic rinse-
aid dispenser pump (Figure 11).
When the appliance is filled with water for the first time in
the day, pump "S" dispenses a rinse-aid quantity in the
booster. At each rinse cycle, pump "S" dispenses a
rinse-aid quantity in the booster to keep proper rinse-aid
concentration. Insert the hose provided in the kit into the
rinse-aid container.
Connections for automatic detergent dispenser
(Figure 11)
R
S
Figure 11
There is a ready-made impression "N" (inside dishwa-
sher chamber floor) to be perforated (5/16"dia/8mm) for
positioning the detergent concentration measuring sen-
sor.
The sensor should be installed without compromising
the watertightness of the appliance.
Electrical connections for automatic detergent and
rinse-aid dispensers.
Terminals are available on the power supply terminal
box for the electrical connection of external dispensers
working at 208V. Max. power 30 VA.
N
Figure 12
Connect the detergent dispenser between terminals 7
and 9. These connection points are live for a set time
during filling of the tank and at the start of the wash cycle
(see paragraph "Setting the dispensers").
8
9
Figure 13
Connect the rinse-aid dispenser between terminals 8
and 9. These connection points are live during filling of
the tank and at the end of the rinse cycle for a set time
(see "setting the dispensers" paragraph).

C5.1 Manual Activation

Whenever the detergent containers are replaced, it may
be necessary to activate the dispensers manually in
order to fill the hoses and eliminate any air.
Simultaneously press the buttons, as shown in the figu-
res below. If necessary, repeat this operation several
times.
DETERGENT PRIMING
RINSE AID PRIMING
DETERGENT DISPENSER
C6 SETTING THE DISPENSER
All operations should be carried out with the appliance
switched on, the door open and no cycle selected.
L1
L2
L3
DETERGENT PRIMING
RINSE AID PRIMING
DISPENSER RINSE-AID
11