Melnor AQUA TIMER 3060 Instrucciones Para El Funcionamiento página 10

If you have chosen to program multiple cycles, the timer will now return to
step 4 to program the next cycle.
After all cycles are programmed, the unit will proceed to the next programming
step. You now need to choose which days of the week the timer will water.
At this point, you have four options. You can choose to water every day, specific
days of the week, skip a number of days or water on odd or even days.
Remember, you can only select one of these options.
To water every day
1. After programming the Mist Cycle, the unit will begin flashing a small arrow
beside WATER DAYS. Press the ACCEPT
move to skip days. Press the RIGHT CURSOR
will begin flashing indicating that the timer should skip no days. Press the
ACCEPT key once.
2. The unit will proceed to USER SET (schedules). The numeral 1 will be blink-
ing. To save this program as program 1, simply press ACCEPT
Otherwise, use the RIGHT CURSOR
wish to use as a reference for this program, and press ACCEPT
once and the arrow will
key once. The word "NO"
key to move to the numeral you
7
.
.