External Power Supply; Other Functions - Chubbsafes EH Guía De Usuario

OMEGA DEPOSIT SAFE

EXTERNAL POWER SUPPLY

When using the safe for the first time or when the batteries have
run down an external power source is used.
Insert four AA batteries into the battery holder supplied taking care
to observe the correct polarity.
Using the jack plug connect it to the keypad as shown.
MECHANICAL OVERRIDE KEY
Should the batteries run down completely or the
lock malfunction the safe can be opened in an
emergency by using the mechanical override key.
Locate the small hole in the bottom side of the fascia
plate on the safe door.
Using the jack plug from the external power pack
or similar, push up into the hole to uncover the
override lock.
When the lock is revealed insert the override
key and turn to the right (clockwise) to unlock
the door.
Turn the handle to open the safe.
After opening the safe and replacing the
batteries, turn the override key to the left (counter
clockwise) and take out the key. Replace the
plastic cover.
DO NOT KEEP THE EXTERNAL POWER SUPPLY OR OVERRIDE KEY INSIDE THE
SAFE.

OTHER FUNCTIONS

Wrong try lock out
If an incorrect PIN code is entered three times in a row a beep will sound for 10 seconds
and the lock will not operate for 3 minutes.
Please wait three minutes before attempting again to enter your PIN number.
Low battery warning
When the batteries are low the LCD display will show "LO-BAT" whenever the lock is used.
Please change the batteries immediately (4 x AA size 1.5V)
3