Safety Instructions - Smarter tools ST-1 Manual De Instrucciones

V. SAFETY INSTRUCTIONS
WARNING!
FOR YOUR SAFETY & PROTECTION, READ ALL SAFETY
WARNINGS AND INSTRUCTIONS CAREFULLY AND COMPLETELY
BEFORE USING THIS PRODUCT. FAILURE TO DO SO MAY CAUSE
DAMAGE OR PERSONAL INJURY.
•
Do not place the helmet on a hot surface
•
Do not immerse the filter in water or any other liquid
•
Protect the filter from being in contact with liquid or dirt. Clean
filter surface regularly.
•
The front cover lens is not unbreakable and does not provide
extraordinary protection against flying particles, splash, spray,
and spatter. The helmet will only protect the eyes and face
from radiation and sparks.
•
Never open or tamper with the Auto-Darkening filter
•
The outside of the lens must be equipped with an outside
protection plate (included) to prevent potential non-repairable
hazards.
•
Keep away from children, children must never be allowed in
the work area. DO NOT! let them handle machines, tools, or
extension cords.
•
DO NOT! Use if the filter does not darken immediately upon
striking the arc.
•
DO NOT! Use the helmet as a hand shield. Wear the helmet
correctly.
•
Wear approved safety glasses with side shields under your
helmet.
•
Use protective screens or barriers to protect others from flash
and glare; warn others not to watch the arc.
VI. LENS & HELMET MAINTENANCE
•
DO NOT! use corrosive solvent on the filter screen or any of the
helmets components
•
DO NOT!
•
If helmet is not in use, please keep it in a dry place. Be aware that the
Auto-darkening filter should not be placed in direct light to avoid
unnecessary filter adjustments. It may cause damage to control
system.
•
Clean the filter lens with a clear lint-free tissue or cotton cloth
•
You should inspect this helmet frequently and immediately replace worn
or damaged parts.
immerse the filter lens in water or any other liquid
1-3