Descargar Imprimir esta página

Declaration Of Conformity - Worx WX527 Manual Original

Sierra circular inalámbrica de iones de litio
Ocultar thumbs Ver también para WX527:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
TROUBLE SHOOTING
Symptom
Tool will not start when operating
the on/off switch.
Cutting depth is less than that
is set.
Blade spins or slips
Blade will not cut a straight line.
Blade kicks back when beginning
a cut
DECLARATION OF
CONFORMITY
14
14
We,
POSITEC Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description Cordless Circular Saw
Type WX527 WX527.9 (5 - designation of ma-
chinery, representative of Circular Saw)
Function Cutting various materials with a rotat-
ing toothed blade
Complies with the following Directives:
2006/42/EC
2014/30/EU
2011/65/EU
Standards conform to
EN 62841-1
EN 62841-2-5
EN 55014-1
EN 55014-2
Lithium-Ion Cordless Circular Saw
Possible Causes
Battery park not plugged in.
Battery park is powered off.
Carbon brush has worn down
Sawdust accumulated at the
rear of the base.
Blade is not tightly engaged
with the spindle.
Blade is dull.
Blade is not mounted properly.
Saw is not being guided
properly.
Blade is not spinning fast
enough
The person authorized to compile the technical file,
Name:
Address: Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2018/11/13
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P . R. China
Possible Solution
Check to make sure battery park is
connected well into a working outlet
Charging the battery.
Replace the carbon brush using a
qualified maintenance person.
Shake out sawdust. Consider
connecting a vacuum for dust
collection.
Remove the blade, and reassemble
it as described in SAW BLADE
ASSEMBLY AND REMOVING
section.
Mount a new, sharp blade on the saw.
Check that blade is properly mounted.
Use a parallel guide.
Allow the saw blade to reach full
speed prior to beginning a cut in the
material.
Marcel Filz
EN

Publicidad

loading

Este manual también es adecuado para:

Wx527.9