Bvcam DV-07-WIFI Guia Del Usuario página 6

4.3. WAN Mode or Remote View Setup
>>Before the WAN configuration, please confirm that the camera is successfully
added to your smartphone or tablet PC in the P2P (LAN) mode, and the P2P (LAN)
connection works well.
4.3.1. Launch the "BVCAM" APP.
4.3.2. Set up the WAN mode or remote view.
Step 1: Tap the setting icon on the "Live video" page and select "Advance Config"
(IOS: Device Settings).
Step 2:Tap "WIFI Config" and select a desired WIFI network to enroll the camera in.
Step 3: Tap "OK"to confirm the WIFI configuration.
4.3.3. The camera will reboot automatically.
Check if the WAN mode or remote view setting works!
1. Exit the "BVCAM" APP.
2. Go to the WIFI or WLAN setting page on your smartphone or tablet PC and join
to another WIFI network which must be different from the one that the camera is en-
rolled in, or you can use your mobilenetwork.