Child Lock
To prevent accidents by children or infants, Child Lock locks all buttons except for the
Power button.
To activate Child Lock
• Press and hold both Soil Level and Spin for 3 seconds. Then, press START/PAUSE to
activate. The door locks and the Child Lock indicator turns on.
To deactivate Child Lock temporarily
• You can deactivate Child Lock temporarily for 1 minute. To do this, press and hold both
Soil Level and Spin for 3 seconds. The door is unlocked for 1 minute and the Child Lock
indicator blinks.
NOTE
• If you open the door 1 minute after deactivating Child Lock, an alarm sounds for up to
2 minutes.
• If you close the door within 2 minutes, the door locks and Child Lock is reactivated. If
you do not close the door or the door is not properly closed, the alarm keeps sounding
for 2 minutes.
• To add laundry after activating Child Lock, deactivate Child Lock or restart the washer.
To cancel Child Lock
• Press and hold both Soil Level and Spin for 6 seconds. The door unlocks and the Child
Lock indicator turns off.
My Cycle
Create your own washing cycle with preferred settings and use the cycle with the push of
a single button.
To create your own cycle
1. Turn the Cycle Selector to select a cycle.
2. Change the cycle settings (Temp., Spin, and Soil Level) as necessary.
3. Add an option to your preference. For more information, see the "Options" section.
4. Press and hold My Cycle for 3 seconds to save your settings. Applicable indicators
blink for 3 seconds. Once you save the cycle, you can use it by pressing My Cycle.
NOTE
If you press and release My Cycle within 3 seconds, the previously saved cycle and
options appear.
Sound
Mute or unmute the sound.
• The Sound Off function can be selected during all cycles.
WF5500M_DC68-03773A-05_EN.indd 41
English 41
3/15/2019 4:54:50 PM