If your AVC-1100 is connected to a USB hub, try connecting it
directly to your computer's USB port. You will also need to
reinstall the drivers.
Remove all other USB devices from your computer.
Ensure that the AVC-1100 is properly connected and that the
drivers are correctly installed.
Need Help Capturing Your Video?
Do not attempt to capture videos using MyDVD or ArcSoft
ShowBiz. Your Adaptec VideOh! CD Converter Kit supports
video capture only by using AV Capture.
AV Capture has a set default capture time limit of 10 minutes.
Adaptec recommends that you do not change this time limit.
Changing it may result in an audio video out of sync condition.
Set your computer monitor's screen resolution to 1024 x 768 or
higher for optimum viewing.
Need Help Playing Your VCD?
You need to select the video clip you want to view by using the
number pad on the video player remote control. If you have
more than 6 video clips, you can navigate between menu
screens by using the skip forward and back controls.
If you trim the beginning of a captured video clip in MyDVD,
the resulting VCD may have audio and video out of sync. To
correct this problem, undo the trimming of the video clip and
re-burn the CD.
11