RIDGID VP2000 Manual Del Operador página 3

SP6580-2 Ridgid.qxd
• To reduce the risk of health hazards
from vapors or dusts, do not vacuum or
pump toxic materials.
• Do not use or store near hazardous
materials.
• Do not plug the Pump Accessory into
the same electrical circuit that is being
used by the Wet/Dry Vac.
• For Wet Applications Only. Do not
attempt to pump dry debris, or debris
of any kind.
• This pump is supplied with a grounding
conductor and grounding-type attach-
ment plug. To reduce the risk of electric
shock, be certain that it is connected
only to a properly grounded, grounding-
type receptacle.
• Test GFCI before each use.
• Do not allow Pump Accessory to be
used as a toy. Close attention is
necessary when used by or near
children.
• Do not leave Pump Accessory when
plugged in. Unplug from outlet when
not in use and before servicing. Turn off
Pump Accessory before unplugging.
• To reduce the risk of injury from
accidental starting, unplug power cord
before changing or cleaning strainer.
• Do not put any object into ventilation
openings. Do not operate pump with
any ventilation openings blocked; keep
free of dust, lint, hair or anything that
may reduce air flow.
• Keep hair, loose clothing, fingers, and
all parts of body away from openings
and moving parts.
• To reduce the risk of eye injury, wear
safety eyewear. The operation of any
utility Vac or blower can result in
foreign objects being blown into the
eyes, which can result in severe eye
damage.
!
CAUTION:
• To reduce the risk of hearing damage,
wear ear protectors when using for
extended hours or using in a noisy area.
• For dusty operations, wear dust mask.
7/27/07 1:22 PM
SAVE THIS MANUAL
Page 3
Use this Pump Accessory only as
described in this manual.
Observe the following warnings that
appear on the motor housing of your
Pump Accessory and GFCI housing.
! WARNING
For your own safety, read and
understand owner's manual. Do not
run unattended. Do not pump toxic,
flammable or
materials. Do not use around explo-
sive liquids or vapors.
WARNING
!
To reduce the risk of electrocution,
complete the following steps:
1) Plug in receptacle.
2) Press reset button. Indicator
should be "ON".
3) Press test button. Indicator
should be "OFF".
4) Press reset button for use. Do not
use if test fails.
WARNING
!
To reduce risk of electrocution, do
not use extension cord to connect
GFCI to power receptacle.
WARNING
!
To reduce risk of electric shock,
connect only to a properly grounded,
grounding-type
pump has not been investigated for
use in swimming pool or marine
areas.
3
other hazardous
receptacle. This