DJI Smart Controller Enterprise Guía De Usuario página 9

7. Flight
Before taking off, make sure the Aircraft Status Bar
in the DJI Pilot app displays "Ready to Go (GPS)" or
"Ready to Go (RTK)".
Manual Takeoff/Landing
左摇杆
Combination Stick Command to
start/stop the motors.
Slowly push the left stick up to
take off. (Mode 2)
The default flight control is known as Mode 2. The left stick controls the aircraft's altitude and
heading, while the right stick controls its forward, backward, and left and right movements.
Left Stick
The motors can only be stopped mid-flight when the flight controller detects a critical error. Use
with caution.
左摇杆
Be sure the Smart Controller is linked to the aircraft.
Refer to the user manual for more Smart Controller usage details (e.g. dual Smart Controller
operations).
Specifications
OcuSync Enterprise
●
Operation Frequency Range
Max Transmission Distance
(Unobstructed, free of
interference)
Transmitter Power (EIRP)
前
后
左转 右转
Up
Down
Turn Left Turn Right
前
后
2.400-2.4835 GHz; 5.725-5.850 GHz
左 右
NCC / FCC: 15 km
CE / MIC: 8 km
SRRC: 8 km
2.400-2.4835 GHz:
29.5 dBm (FCC); 18.5 dBm (CE) ; 18.5 dBm (SRRC); 18.5 dBm (MIC)
5.725-5.850 GHz: 28.5 dBm (FCC); 12.5 dBm (CE); 20.5 dBm (SRRC)
Ready to Go (GPS)
右摇杆
OR 上升
下降
Slowly push the left stick down until
the aircraft lands. Hold for a few
seconds to stop the motors.
左
Right Stick
Forward
Backward
Left
右摇杆
上升
下降
1
左转
右
Right
右转
7