Philips AZ 1605 Manual Del Usario página 9

CD PLAYER
Playing a CD
1 Set the POWER slider to CD.
2 Press / OPEN to open the lid.
3 Insert an audio CD (printed side up) and close the lid.
™ The CD player starts and scans the contents list of the CD.
Then, the CD player stops. Display indication: the total
number of tracks.
4 Press the PLAY·PAUSE 2; button to start CD play.
™ Display indication: the current track number.
5 Press the STOP 9 button to stop CD play.
™ Display indication: the total number of tracks.
You can interrupt CD play by pressing PLAY·PAUSE 2;. Continue
CD play by pressing the button again.
™ Display indication: the current track number flashes.
Note: CD play will also stop if:
– you open the lid,
– the end of the CD is reached, or
– you move the POWER slider to TUNER or TAPE .
If you make a mistake when operating the CD player, or the
CD player cannot read the CD, the display shows E or no. (See
chapter "TROUBLESHOOTING".)
If you press PLAY·PAUSE 2; and there is no CD inserted the
display shows no.
CD
CD
CD
CD
9