Sistematica NIMBLE Manual Del Usario página 6

Features
Feat
Nimble contains Sistematica technological solutions, retaining the same
features of the other products in the range, offering excellent performan-
ce even as the entry level product:
clOSelinK
Two-way CloseLink communication is at the heart of Nimble. Thanks
to constant interaction between the handheld device and controller, the
operator always has the situation under control, since intervention is
possible at any time with maximum efficiency. The Controller constantly
checks remote connection with the handheld device; if after a default
time (300 ms for manned functions, 5 seconds for on/off functions), a
correctly coded signal is not received, the controller goes in standby,
resetting all the output to zero. Nimble also uses up to 15 transmission
channels and proprietary algorithms for asynchronous communication
to reduce the probability of interference with external sources to a mi-
nimum. The 150m capacity in free space and without obstacles makes
Nimble ideal for applications for operation at long distances, thanks
to GFSK digital modulation that ensures maximum autonomy of 2,500
hours in stand-by and up to 200 hours of continuous transmission with
2 simple AAA batteries.
UniQUeneSS
Each Nimble system has a distinct source code which means it can
also work with other Sistematica devices nearby and you can be as-
sured that commands will only be exchanged among components on
the same system: the 32 bit code enables distinct identification of over
4 billion handheld device-controller couplings. In the event of replace-
ment, it is possible to pair the new handheld device/controller with the
due counterpart using a simple procedure, which can even be carried
out by the end user.
cOmPliance With StanDaRDS
- Directive 1999/5/EC (R&TTE) Remote control and telecommunications
equipment (Article 3, Article 10 and Appendix 4)
- EN 60950-1 Health and safety
- EN 301 489-3 Electromagnetic compatibility
- EN 300 220-2 Use of radio frequencies spectrum
- EN 60204-32 Electrical equipment safety
- Directive 2004/104/EC Vehicle electromagnetic compatibility
- FCC part 15.249