Publicidad
Idiomas disponibles
Idiomas disponibles
en
Basic operation
（Thermostat）
(See the online user guide A6V11562455 for more information – scan the QR code on page 1)
Local device idle screen
(after 2 minutes of
inactivity)
Local device home screen
6 / 70
1
Relative room humidity
2
Room air quality status:
(Displayed only if an external air quality sensor is connected to
the thermostat)
3
Outside air temperature (displayed only if an external
temperature sensor is connected to the thermostat)
4
Green leaf: Energy-optimized mode.
Red leaf: Tap to restore the energy-optimized mode.
5
Room temperature
1
Tap the Menu icon to display detailed information and settings.
2
Tap to show additional measurements.
Note: Only applies if an external sensor is connected. Otherwise,
humidity is displayed.
3
Tap to display notifications (only visible if any).
4
Room temperature.
5
Tap to toggle between At home and Away.
At home: Toggle between Auto and Manual modes.
Away: The device maintains the Economy setpoint.
6
Tap to switch between AUTO and Manual:
Works according to a scheduler, or temporarily follows the
current user setpoint, until the next scheduled switching
point.
Manual mode. Works permanently according to the
current user setpoint.
7
Tap or slide to change the room temperature setpoint.
The heating output is energized.
No heating output is energized.
good,
average,
A6V11562445_en--_a
poor.
Publicidad
