Standard Conformity - Olimpia splendid SITALI SF 150 Manual De Instalacion Y Uso

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

FUNCTIONALITY

Antifrost

This functionality prevents frost building up on the heat exchanger due

to extremely cold air. When it is activated, the unit runs in extract only at

speed 1, for 30 minutes.

Acoustic signal

Any time a setting is transferred from the controller to the unit, a short

acoustic signal is emitted. This can be deactivated by pressing the

button for 7 seconds, after when a green led flashes to indicate that the

acoustic signal is off. To reactivate the acoustic signal repeat the same

operation for 7 seconds until the led becomes green and an acoustic signal

is emitted.

BACK UP BUTTON

In case the remote controller gets lost or the batteries are dead, speeds 1, 3 and OFF position can be selected from the

on board touch button (C image pag.7). The airflow direction is always alternate and the operation mode (either comfort or

efﬁciency) is the last selected from the remote controller.

SYNCHRONISATION OF A NUMBER OF UNITS

It is possible to synchronized up to 10 units contemporaneously, through wire (2 pole twisted pair type , max 30m length)

so to have mode and inversion time synchronized. When the unit is switched on for the ﬁrst time, the rotation direction of

each unit (clockwise or anti-clockwise) is automatically established. Other functionalities like speed, smart humidity control

and boost , continue to be controlled independently on each single unit.

Wiring diagram as per Fig. 16 B

MAINTENANCE

Maintenance can be carried out by the user as indicated in page 28.