Setting Screen; Direct Programming And Operation; Error Message - Selecta CENTRONIC BLT Manual De Instrucciones

INSTRUCTION MANUAL CODE 80315 REV B
SETTING
ROTOR DATE & TIME
STANDARD
5000 rpm
Selection of working
temperature in model
CENTROFRIGER
RPM
SET
00:00
RAMP
00:00
hh:mm
Fig 7.3 Error screen
J
.P. SELECTA s.a.u.
7.1
00 / 00 / 00
00 : 00
Language
ºC
7.2
- Press on the RPM display.
- Press on
7001407
+25 ºC
- Press on SET to establish minutes/hours of operation.
RPM OPEN
0
- If necessary, set the acceleration and deceleration times of «RAMP»
in
rpm
•
RCF
hh:mm
•
RAMP
00:00
(Setting ramp minutes) A time of 00.00 indicates the fastest.
Press
The same screen indicates the centrifugation process evolution.
Once centrifugation is finished, open the lid with:
7.3
Any incidence in operation causes an error message.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
Octubre 2019 (It can be modified without notice)

Setting screen

- Update date, time.
Press on the Date and Time panel.
Use the keys:
and accept by pressing:
In a similar way:
- Select the Language.
- Select the Temperature units.

Direct programming and operation

RAMP : Acceleration time up to rpm set point.
RAMP : Deceleration time.
to start centrifugation

Error message

to set the RPM.
OPEN
Tel 34 937 700 877 Fax 34 937 702 362
Page: 15