Dust/Chip Extraction; Connecting A Dust Extraction Unit; Selecting A Tool - Parkside PAMFW 20-Li A1 Traducción Del Manual De Instrucciones Original

Dust/chip extraction

Materials containing asbestos must not be
processed. Asbestos is a known carcinogen.
WARNING! RISK OF FIRE!
■ When working with electrical appliances
which can be connected to a vacuum cleaner
via a vacuum cleaner adapter, there is a risk
of fire! In unfavourable conditions, e.g. when
sparks are flying while sanding metal or
metal residues in wood, wood dust in the bag
of the vacuum cleaner can spontaneously
ignite. This is a particular risk if the wood dust
is mixed with paint residues or other
chemicals and the workpiece has become hot
after being worked for a long time. Therefore,
avoid overheating of the material being
sanded as well as the appliance. Always
empty the vacuum cleaner's dust bag before
taking work breaks.
■ Always use dust extraction.
■ Ensure that your workplace is adequately
ventilated.
■ Observe the regulations applicable in your
country regarding the materials to be worked.

Connecting a dust extraction unit

♦ Place the dust extraction unit
appliance and fix it into place on the appliance
with the screw.
♦ Fit the angle adapter
unit .
The angle adapter
180°.
│ GB │ MT
■ 50
under the
onto the dust extraction
can be turned by up to

Selecting a tool

NOTE
► The universal fitting with its easy tool change
function is suitable for standard accessories.
HCS plunge saw blade 32 mm
Materials
wood, plastic, gypsum (plaster) and other soft
materials
Application
–
separation and plunge saw cuts
–
sawing close to edges, even in hard-to-reach
areas
Example sawing recesses in lightweight walls.
Diamond saw blade
Materials
Tile adhesives, tile joints
PAMFW 20-Li A1