Lint pad
The lint pad is a separate accessory and cannot be attached to the steam
head.You can use the lint pad independently from the steamer.
The lint pad removes hair, lint and animal fur for a professional finish.
• To use the lint pad, slowly brush the clothing with the grain or nap of
the fabric.
• The pad can be cleaned by brushing it in the opposite direction. We re-
commend cleaning the pad on an old cloth that can be discarded.
AFTER USE
• After using the garment steamer, switch off the device by pressing the
pedal once again. The power indicator light will go off, and you can then
unplug the device.
• Hang the steam head in an upright position on the hook when not in use.
• Empty and rinse the water tank each time before storage in order to flush
out any scale particles. (fig.15)
• Loosely wind up the electrical cord and close with the Velcro strip, then
hang it from the clip on the pole. (fig.16a, 16b)
• Do not carry the steamer by the water tank handle. This appliance in-
cludes luggage style wheels for added convenience when transporting.
Warning: Never touch the steam head until it has cooled down
completely.
TRANSPORT
• Your device is fitted with two wheels for ease of transport. Tilt the de-
vice towards the rear holding the pole and then pull along to transport.
• You can also lift up the device in order to transport it, again holding the
device by the pole.
Do not attempt to lift up or transport the device holding the pedal, the
water tank handle or the built-in hanger.
CLEANING
• Clean the main unit with a damp cloth.
• To maintain maximum performance, your steamer must be descaled oc-
casionally. The time between descaling operations depends on the qua-
lity of the water and the frequency with which you use the appliance.
14