Maintenance / Care / Storage - Brill 400 RLB Manual Del Usuario

body when using it. Position the
switched on appliance to your left
and move it slowly to the right,
Hereby, the rotating brushes pro-
vide the cleaning action with pow-
erful support. In order to collect
the refuse, attach the dirt collec-
tor and work as described above.
Cleaning stairs without the
dirt collector
You can also use the sweeping
machine to clean stairs flush with
the edges. Guide the switched
on appliance over the steps,
holding it by your side. The
rotating brushes automatically
convey the dirt backwards.

9. Maintenance / care / storage

Accidents and appliance malfunc-
tions can be avoided by carry-
ing out regular inspections (firm
seating of screwed connections,
cracks, damage) and by replay-
ing damaged or worn parts.
The rotating aerator
A
roller or brushes can
cause injury.
Caution! Before carrying
A
out any work on the
appliance or inspecting, cleaning
and repairing it, switch the
appliance off and disconnect the
battery clip from the battery.
Risk of injury!
Due to the risk of personal injury
and material damage: do not
clean the appliance under flow-
ing water; especially not under
high pressure.
9.1 Maintenance
The appliance is mainly
maintenance-free.
Cleaning window-sills without
the dirt collector (Fig. 17)
You can also work with the
sweeping machine above your
head in order to remove cob-
webs or dust from window-sills.
To do so, the slightly move the
switched on sweeping machine
(without the dirt collector) across
the surface to be cleaned.
Parking position when interrupt-
ing work (Figs. 18, 19)
The sweeping machine must be
placed in the parking position if
the work is interrupted. Lift the
sweeping machine up, ensuring
Cleaning
Switch the appliance
A
off and disconnect the
battery clip from the power
battery.
In order to prolong the perform-
ance and serviceable life, the
appliance should be cleaned
before and after each use.
Wipe over the cover with a moist
cloth. Remove the residual soil-
ing from the aerator cylinder
with a brush. Any twigs or small
branches which become caught
up in the brushes during work
with the appliance are to be
removed.
Caution! Only the dirt
A
cleaner is to be cleaned
under running water.
Storage
Store the appliance in a dry
place where it is protected from
frost. Ensure that children are
unable to access the place of
storage. Do not place the appli-
that the entire dirt collector
remains on the ground (Fig.18).
Position the sweeping machine
above the dirt collector. You can
now lock the sweeping machine
onto the dirt collector by placing
both of the projections on the
brush cover onto the dirt collec-
tor (Fig. 19).
The sweeping machine is
A
not to be placed on the
brushes. Always bring the appli-
ance into the parking position
when interrupting your work.
ance on the aerator roller or
brushers when placing it in stor-
age. This deforms the springs of
the aerator roller or the brushes
and impairs its function. Hang
the aerator roller or sweeping
machine up in a suitable place.
Repairs
Repairs are only to by carried
out by Brill Service or by
authorised Brill dealers.
Replacing the aerator cylinder
(Fig. 5)
In order to replace the aerator
cylinder, loosen the aerator
cylinder head screw and pull
the aerator cylinder off the
drive shaft. (Assembling the
aerator roller under No. 6.)
Replacing the brushes (Fig. 7)
To replace the brushes, loosen
the screw at the brush head and
pull the brush off the drive shaft
(Assembling the brushes under
No. 6.)
GB
21