Ironing Without Steam; Other Features - Philips Mistral GC2030 Manual Del Usuario

ENGLISH
6
C
2 Set the steam control to the appropriate steam position.
- q for moderate steam (temperature settings 2 to 3)
- w for maximum steam (temperature settings 3 to MAX)
Steaming will start as soon as the set temperature has been reached.
B
Types GC2005, 2006, 2010, 2011, 2015, 2016:Water may leak from
the soleplate if the set temperature is too low (MIN to 2).

Ironing without steam

1 Set the steam control to position O ( = no steam).
2 Set the temperature dial to the recommended position.
See 'Setting the temperature'.

Other features

Spraying
To remove stubborn creases at any temperature
Make sure that there is enough water in the water tank.
C
1 Press the spray button a couple of times to moisten the
laundry.
Extra Steam (types GC2020, 2006, 2005 only)
This function provides extra stream to remove stubborn creases.
The Extra Steam function only works at temperature settings between
3 and MAX.
C
Set the steam control to highest position q.
1
C
2 Press and hold the Extra Steam button down for max. 5
seconds.
3 Wait for at least 1 minute before you use the Extra Steam
function again to prevent water from dripping out of the
soleplate.