Braun 7 Serie Manual Del Usuario página 8

Series
Ser ies
r e l e as e
Series 7
r e l e as e
click!
Series 7
r e l e as e
Series 7
r e l e as e
Series 7
r e l e as e
r e l e as e
70S/70B
Series 7
r e l e as e
8
Cleaning
Regular cleaning ensures better shaving
performance. Rinsing the shaver head under
running water after each shave is an easy and
fast way to keep it clean:
• Switch the shaver on (cordless) and rinse the
shaver head under hot running water until all
residues have been removed. You may use
liquid soap without abrasive substances.
Rinse off all foam and let the shaver run for a
few more seconds.
• Next, switch off the shaver, press the release
button (2) to remove the Foil & Cutter
cassette (1) and let it dry. The shaver shall not
be used until it has dried.
• If you regularly clean the shaver under water,
then once a week apply a drop of light
machine oil on top of the Foil & Cutter
cassette.
Alternatively, you may clean the shaver with a
brush:
• Switch off the shaver. Remove the Foil &
Cutter cassette (1) and tap it out on a flat
surface. Using the brush, clean the inner area
of the pivoting head. However, do not clean
the foil and cutter cassette with the brush as
this may damage it.
Keeping your shaver in top shape
Replacing the Foil & Cutter cassette / reset
To maintain 100% shaving performance, replace
the Foil & Cutter cassette (1), when the
replacement symbol lights up on the shaver
display (9) after about 18 months or when
cassette is worn.
The replacement symbol will remind you during
the next 7 shaves to replace the Foil & Cutter
cassette. Then the shaver will automatically
reset the display.
After you have replaced the Foil & Cutter
cassette, use a ball-pen to push the reset button
(8) for at least 3 seconds to reset the counter.
While doing so, the replacement light blinks and
goes off when the reset is complete. The manual
reset can be done at any time.