Genie 650 XCD Manual Del Usuario página 11

Please ensure that never more than the above-mentioned maximum quantity is
inserted in the shredder. Otherwise the device may sustain damage.
Separate shredder for CD/ DVD:
This document shredder is equipped with a separate shredder for CDs/DVDs. CDs/DVDs
are shredded into 3 pieces. Given that such materials always present the risk of
splinters, please keep your face at an acceptable distance when inserting CDs/DVDs.
This is in order to avoid serious injuries. The shredded material is then collected in a
separate tray thereby facilitating its environmentally-friendly disposal.
Insert CDs:
1. Insert the CD centrally from above into the CD / DVD input opening. You can only cut
just one CD.
2. Do not insert your finger into the central hole of the disc when you insert it into the
device, there is danger of injury!
Protection against paper jams and overloading:
The 650 XCD is equipped with a motor overload guard. To protect the machine well, we
suggest the user to operate it in this way: work 2 minutes then rest 60 minutes. Under the
following conditions, the current feed to the unit's motor is interrupted:
1. Continual operation of the document shredder with maximum capacity for a prolonged
period of time, e.g. longer than 2 minutes without interruption.
2. Overrunning the shredding capacity e.g. adding more than 10 sheets of paper (80g) in
one operation or in the event the paper is not inserted length-wise into the feed slot.
Under the above-mentioned conditions, the automatic overload guard of the motor is
triggered, whereupon the current feed to the device is interrupted. In such a case, please
take the following steps:
1. Disconnect the main plug from the AC socket in order to avoid the risk of serious
injuries and wait at least 60 minutes until the overload guard has reset. Now tear off
excess paper from the top of the shredder or remove it.
2. Reconnect the main plug to the AC socket and press the REVERSE button. Pull the
remaining paper away from the shredding blades. Afterwards, press the FORWARD
button. If necessary, repeat this step.
3. With pressing the FORWARD button and the open feed slot, you may now continue the
normal shredding process.
- 11 -