Latch Installation - Diono monterey XT Manual De Instrucciones

LATCH Installation

To improve safety and performance, this booster seat is equipped with a unique, LATCH
system that allows secure attachment to a vehicle's lower LATCH anchor locations.
WARNING: Unsecured objects can become flying hazards and can cause
serious injury in an accident. Diono always recommends utilizing LATCH
installation in vehicles equipped with lower anchors.
Disengage LATCH connectors from storage slots and lay
booster seat on its side.
1
While depressing the cam lock lever,
2
Pull LATCH connectors away from the booster seat and
extend both straps all the way.
3
Attach both LATCH connectors to the vehicle anchors, starting
with the connector that is furthest from you. For ease of use,
make sure open end
of hooks face upward during use.
4
While pushing booster against vehicle seat,
adjuster strap tight and then the other.
NOTE: Even with LATCH properly attached and adjusted, child seat
will still have movement against the vehicle seat back and bottom.
5
pull one
12