Publicidad
Idiomas disponibles
Idiomas disponibles
BUILDER EDITION PSU
4. Plug ATX 12V 4-pin (b) or 8-pin (d) connector into the 4-pin or 8-pin Pentium
4 connector on the motherboard.
5. Plug 4-pin peripheral connectors (e) into related peripherals.
6. Plug 4-pin floppy drive connector (f) into the floppy drive.
7. Plug 5-pin SATA connector (g) (if provided) into the SATA 5-pin drive when
necessary.
8. Plug 6-pin PCI connector (c) (if provided) into the PCI 6-pin drive when
necessary.
9. Re-cover the PC chassis and secure it. Plug-in the AC power cord to the
power supply receptable (h).
10. Select the "I/0" switch (i) to "I", then turn on the computer.
Usage illustration
- Make sure the power connectors are plugged into the right positions
before turning on the power source. Any incorrect installation of connectors
could damage your PC.
- Make sure the voltage is at an appropriate voltage source: 230 Vac.
- Please check the specifications on the tags and make sure the voltage
function corresponds to the voltage source of your territory.
- Under no circumstance should the power supply cover be opened.
There are dangerous high voltages inside and it might damage the
comprised parts as well as being health hazardous!
- Do not store the power supply in humid high temperature environment
and do not use it under such condition.
Power supply features
- Storage: 50000 feet
- Operating Humidity: 20% ~ 90%
- Storage Humidity: 20% ~ 95%
- Operating Temperature: 0C ~ 40C
- Storage Temperature: -40C ~ 70C
- MTBF: 100000 hours minimum at 25C
- Height: Operate properly at any altitude between 0 to 10000 feet.
Publicidad
