AQUARAY MultiControl 8 Instrucciones De Operación página 6

• Lamps will start to dim when the OFF TIME
equals the current time.
R MP has a range of 1 to 240 (1 minute to 4
hours).
• The channel level setting allows the maximum
brightness of each channel to be set as a
percentage.
• The minimum level settings for each channel
are in operation when that channel is in the
OFF phase.
Please note: the minimum level cannot
exceed the maximum level. t 'OFF TIME'
the units must dim and at 'ON TIME' the units
must brighten.
• DEMO mode can be entered by holding the
MODE button during power up.
displayed and the clock will run fast.
In DEMO mode, the lamps continuously
brighten and dim according to the user set
program over a 2 minute and 20 second
period. The ramp rate is fixed at approximately
10 seconds.
Please note: the clock displays the time of
day. However, 1 hour is reduced down to 6
seconds, making the full 24 hour cycle just 2
minutes and 20 seconds.
4
'D' will be