How To Use - Black+Decker KE3000S-KIT Manual De Instrucciones

How to Use

This appliance is for household use only.
BEFORE USING YOUR KETTLE
•
Remove all packing materials, any stickers and the plastic band around the power plug.
•
To register your product, go to www.prodprotect.com/blackanddecker.
• Wash all parts as instructed in CARE AND CLEANING section.
• Select a level surface where this unit is to be used allowing enough
space for steam to escape without damage to counters, cabinets and
walls.
• Fill kettle to maximum fill line with cold water. The line is indicated
with a marker inside the kettle. (A) Bring to boil, discard water, and
repeat. Kettle is now ready for use.
Note: The kettle only operates when placed on the base with the ON/OFF (I/O) button in the
ON (I) position. The kettle automatically shuts off when water has boiled or there is no water in
the kettle.
Important:
• Do NOT fill the kettle with any substance other than water. Heat water only.
• Do NOT operate the kettle without water.
• Do NOT overfill the kettle. (Keep water level below the max fill line on the marker inside
the kettle.)
FILLING THE KETTLE
1. Remove the kettle from the base.
2. Pull lid handle up to remove the lid.
3. Fill with desired amount of cold tap water.
4. Put the lid back on the kettle.
5. Unwind cord from base.
6. Place the kettle securely on the base.
BOILING WATER
1. Plug cord on the base into standard electrical outlet.
2. Press the On/Off (I/O) switch to the On (I) position. The power indicator light turns on and the
water begins to heat.
3. When water boils, the kettle and the power indicator light will automatically turn off.
Note: You can also turn the appliance off at any time by lifting the ON/OFF (I/O) switch to the
OFF (O) position.
Warning: Kettle filled with boiling water is hot. Use only the handle to pick it up.
When taking kettle to the table, carry kettle with caution to avoid spilling. Set it on a trivet or
hot pad to protect the table surface or tablecloth.
Important: Hold kettle handle firmly when pouring, especially when filled to the max fill
line. Do not pour too fast.
4. Unplug the kettle when not in use.
Note: This kettle has a boil dry protection feature that automatically turns the kettle and power
indicator light off when water has boiled or if there is no water in the kettle.
4
A