Channel Settings; Channel Search - Metronic Zapbox twin 5 Manual Del Usuario

First Time Installation
[By Freq] Sort the channels according to the frequency.
[By Service name] Sort the channels in service name's order.
(d) LCN (Logical channel number)
Set LCN on or off.
(2). Picture Setting
To access the Menu, press MENU then select [Picture] using the RIGHT/LEFT key. The Menu
EN
provides options to adjust the video settings. Press UP/DOWN to select an option and press
RIGHT/LEFT to adjust that setting. Press EXIT to exit the menu.
(a) Resolution
You can change this setting if the picture resolution does not appear to be correct. This setting is
to match the most common setting for HDMI.
[480P]: for NTSC TV system.
[576P]: for PAL TV system.
[720P]: for NTSC or PAL TV system.
[1080I]: for NTSC or PAL TV system.
(b) TV Format
If the picture does not appear to be correct you can change this setting.
This should match the most common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
(c) Video output
Set the format for the scart video output;
RGB: Scart output RGB;
CVBS: Scart output CVBS;

(3). Channel Search

To access the menu, press MENU and select [Search Channel] using the RIGHT/LEFT keys.
This menu provides options to adjust the search channel settings.
Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the setting .
Press EXIT to exit the menu.
14
8
Technical service: soporte@metronic.com