Telstar TMD016310MD Manual De Instrucciones página 33

Microwave oven
TMD016310MD
11.Bevergae
a) Press " BEVERAGE " repeatedly until the number you wish appears in the
display, "1","2","3" cup will display in order. One cup is about 120ml. For example,
press "BEVERAGE" once , "1" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds once.When cooking nish,buzzer
sounds ve times and then turn back to waiting state.
12.Dinner plate
1. Press " DINNER PLATE " repeatedly until the number you wish appears in the
display, "9.0","12.0","18.0" oz will display in order.
For example, press "DINNER PLATE" once , "9.0" appears.
b. Press " START/+30 SEC. " to cook, buzzer sounds once.When cooking nish,buzzer
sounds ve times and then turn back to waiting state.
13.Pizza
1. Press " PIZZA " repeatedly until the number you wish appears in the
display, "4.0","8.0","14.0" oz will display in order. For example, press "PIZZA" once ,
"4.0" appears.
2. Press " START/+30 SEC. " to cook, buzzer sounds once.When cooking nish,buzzer
sounds ve times and then turn back to waiting state.
14. Memory function
1. Press "0/MEMORY" to choose memory 1-3 procedure. The LED will display 1,2,3.
2. If the procedure has been set, press " START/ +30 SEC." to use it. If not, continue to
set the procedure. Only one or two stages can be set.
3. After nishing the setting, press "START/ +30 SEC." once to save the procedure and
turn back to the waiting states.If press " START/ +30 SEC." again,it will start cooking.
Example: to set the following procedure as the second memory, that is memory 2.
to cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "0/MEMORY" twice,stop pressing until the screen displays "2".
b.Press "TIME COOK" once,then press "3","2","0" in order.
c. Press "POWER" once,"PL10" display,then press "8" and "PL8" displays.
d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once then turn back to
waiting states. If you press "START/+30SEC." again, the procedure will be saved as the
memory 2 and operated.
e. If the electricity is not cut o , the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting states, press "0/MEMORY" twice,
screen displays "2", then press "START/+30SEC." to run.
15