NETGEAR AirCard 785 Inicio Rápido página 7

4. Ensure that the micro-SIM card is seated
securely.
5. Reinstall the battery.
If the battery does not install easily, check the
orientation.
6. Replace the cover.
To power on your hotspot:
¾
Press and hold the Power button until the LCD
screen lights up.
A language selection screen displays.
To select a language:
¾
1. Press the Navigation button to cycle through
the language options until your language is
highlighted.
Press the Power button to select the language.
2.
You can change the language again later from the
hotspot web page.
To recharge your battery:
¾
1. Connect the micro USB cable to your hotspot.
2. Connect the other end of the cable to the USB
port on your computer or other device.
Note: Your battery comes partially charged.
7