3
PPTP Gateway: Enter the Gateway.
4
Connection ID: Enter the Connection ID when necessary.
5
MTU: Enter the MTU size (If the size is not specified by your internet provider,
please leave the default value at 1492)
6
BEZEQ-ISRAEL: Only for Israel
7
Connection Type:
•
Continuous: The PPP-connection will always be active
•
Connect on Demand: The PPP-connection will establish when a
computer is accessing the Internet. The PPP connection will disconnect
when there is no more Internet traffic during the Idle Time (minutes),
entered in the field below.
Manual: The PPP connection is established / disconnected manually by
•
clicking Connect / Disconnect.
Click Ok to proceed. (Go to " Finishing the Broadband Connection Type Setup Wizard"
on page 8)
L2TP xDSL: used for cable modems with L2TP connection.
o
•
WAN Interface Settings: DHCP client or Fixed IP address
•
Obtain an IP address automatically:
1
Host Name: Enter your Host Name if necessary.
- IP Address info for L2TP xDSL -
Setup the Broadband Router
7